C*Pix SDC2000 Manual de Instruções descarregar pdf (Página 35)

Ignite SDC/HDC Robotic Camera Instruction Manual 35

Operating Procedure

Note The HDC camera accepts SD and HD synchronizing signals. HD synchro-

nizing signals may require different test equipment and may display differ-

ently than signals shown in Figure 15.

• Using a two-channel oscilloscope, observe the gen-lock input

and camera video output waveforms.

• Match the horizontal phases of the gen-lock in and video out

signals (Figure 15), by adjusting the camera H-Phase setting of

the GEN-LOCK or G/L menu.

Figure 15. Gen-Lock Horizontal Phase Adjustment Waveform

3. Adjust the lighting for the object.

4. Start shooting.

• Refer to the Ignite Live Production Control System User Manual for

automated camera control procedures.

• Refer to the JSC-2300 SHOT Director Robotics/Camera Controller

Instruction Manual if you want to:

• Control the camera manually

• Create and save presets

• Change camera settings

5. After shooting, turn off all equipment power.

Video signal

Gen-lock signal

Horizontal phase

8492_71_r0

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 121 122

Sem comentários

C*Pix SDC2000 Manual de Instruções Página 35