C*Pix SDC2000 Manual de Instruções descarregar pdf (Página 49)

Ignite SDC/HDC Robotic Camera Instruction Manual 49

Menu Selections

Synchro Scan

(60.34 Hz to 15.75 kHz) This setting is possible only when the Shutter

Speed setting is at S/Scan.

Horizontal bar noise can be reduced by synchro-scan adjustment in shoot-

ing workstation scenes, for example.

*For luminance settings at each shutter speed and synchro-scan shutter

speed, refer to the following table.

V Resolution

Normal: Normal image. (CCD storage will be by field storage. Recom-

mended for general use because sensitivity will decrease at the Fine set-

ting.

Fine: Vertical resolution increases. (Vertical resolution is raised without

increasing residual images by frame storage and electronic shutter.)

Baud Rate

(1200bps, 2400bps, 4800bps, 9600bps)

Select a communication speed in controlling the camera from the com-

puter.

Component

This enables RGB, Y/Pr/Pb or Y/C to be selected as the component signals

which are to be output from the I/F REMOTE connector.

Aspect Ratio

Aspect ratio can be selected from 16:9 or 4:3.

Fan SW

OFF: Select this setting to stop the fan when its operating sound is found to

be bothersome in a studio or other such environment.

Auto: The temperature is detected automatically, and the fan starts operat-

ing when the temperature exceeds approx. 95 ºF (35 ºC). Under normal cir-

cumstances, the “Auto” setting is used.

Language

English: Menu screen is displayed in English.Japanese: Menu screen is

displayed in Japanese.

Table 8. Other Settings

Selection

Description

Shutter

Speed

Synchro

Scan

Required

Luminance

Ratio

OFF - 1

1/100 100.3 Hz 2

1/250 250.0 Hz 4

1/500 492.2 Hz 8

1/1000 984.4 Hz 16

1/2000 1.969 kHz 32

1/4000 3.938 kHz 64

1/10000 7.875 kHz 160

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 121 122

Comentários a estes Manuais

Sem comentários

C*Pix SDC2000 Manual de Instruções Página 49

Comentários a estes Manuais