C*Pix SDC2000 Instruções de Operação descarregar pdf (Página 165)

SDC 2002

4.3. TK Config Menu

4-79

Operating Instructions - Rev. 1 / 6.2003

3. Frame

Count Mode

Selection of the standard-dependent timecode operation mode.

Following frame count modes are selectable:

24 frames: for 24 frames/sec and 60 or 59.94 Hz video systems

25 frames: for 25 frames/sec and 50 Hz video systems

30 frames: for 30 frames/sec and 60 Hz video systems

30 comp.*: for 24 frames/sec and 60 or 59,94 Hz video systems

* Note:

30 comp. = 30 frames compensated

In 24 fps mode the frames are numbered from 0 to 29, but

each fifth digit is dropped:

0, 1, 2, 3, 5, 6, 7, 8,

10, 11, 12, 13, 15, 16, 17, 18,

20, 21, 22, 23, 25, 26, 27, 28,

0, 1, 2, ....

4. LTC-Out

Mode

Serves to select Linear Timecode operation mode.

Linear Timecode should not be mixed up with the Longitudinal Timecode gen-

erated in a VTR. One possible application of this feature is the synchronization

of external devices, such as DAT or Sepmag Players, it can also be used to

feed the external Timecode In of the Recorder VTR or the Phantom Transfer

Engine for HD transfers into the SGI HD Input/Output board.

With the upper key, Linear Timecode Mode settings can be made. The current

mode is displayed on the key.

Three different modes are selectable: Film Fixed, TV-TC Gen and Film Vari-

able.

To change this mode, click on the key and make your choice from the drop-

down menu.

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 365 366

Sem comentários

C*Pix SDC2000 Instruções de Operação Página 165